Swann 16CH - Page 8

5
8) “ ” :
Press “ ” button to pause the play back files.
9) “ ” :
Press “ ” button to stop the play back files.
10) “ “ :
Under playback mode, press “ ” button to fast rewind.
11) “ “ :
Under playback mode, press “ ” to fast forward.
12) “ZOOM” :
Press “ZOOM” button to enlarge the picture of selected channel (2X digital zoom).
13) “PLAY” :
Press “PLAY” button to playback recorded files.
14) “▲▼◄►“:
Press “▲▼◄►” to move the cursor up / down / left / right.
15) “SHIFT”+ “SEQ”:
Press “SHIFT” + “SEQ”to activate the call monitor function and press “SEQ” to escape
the call monitor mode.
16) “SHIFT” + “AUDIO“ :
Press “SHIFT” + “AUDIO“ to select live or playback sounds of the 4 audio channels.
17) “SHIFT” + “SLOW“ :
Under playback mode, press “SHIFT” + “SLOW“ to show slow playback.
18) “SHIFT” + “CH－ “or “CH＋”:
Press “SHIFT” + “CH－ “ or “CH＋” change the setting in the menu / to select the
channel.
19) “SHIFT” + “SET” :
Press “SHIFT” + “SET” to change channel display position.
Press “▲▼◄►” to select the channel which You would like to change,
Press “＋”or “－” select the channel which You would like to show.
Press “ENTER” button to confirm.
20) “SHIFT” + “SEARCH” :
Press “SHIFT” + “SEARCH” buttons to enter the search mode.
21) “ ” + “ ” :
Press “ ” + “ ” buttons at the same time to enter / exit the PTZ control mode.