EasyManua.ls Logo

Swann 4 CH Digital Video Recorder - Appendices; Install the HDD

Swann 4 CH Digital Video Recorder
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
20
Video format
NTSC/EIA or PAL/CCIR
Hard disk storage
IDE type, UDMA 66, supported 250 GB HDD
Recording mode
Manual / Alarm / Timer / Motion
Camera Input Signal
Composite video signal 1 Vp-p 75
Ω
BNC, 4 channels
Main Monitor Output
Composite video signal 1 Vp-p 75
Ω
BNC
Call Monitor Output
Composite video signal 1 Vp-p 75
Ω
BNC
Audio input
4 audio inputs, (RCA) *
Audio output
2 audio outputs, (RCA) **
Motion Detect Area
16 * 12 targets per camera
Motion Detect Sensitivity
99 Levels
Video Loss Detection
Yes
Refresh Rate
240 field/sec. for NTSC / 200 field/sec. for PAL
Dwell Time
Programmable (1~15 Sec)
Picture in Picture
Yes (Movable)
Key Lock
Yes
Picture Zoom
2*2 ~4*4 (Movable)
Camera Title
8 letters
Video Adjustable
Hue/ Color/ Contrast/ Brightness Adjustable
Alarm Input
TTL input, Hi (5V), Low (GND)
Alarm Output
COM./N.O/N.C
Remote Control
RS-232 or RS-485
Time Display Format
YY/MM/DD, DD/MM/YY, MM/DD/YY, OFF
Power Source
DC 19V
Power Consumption
<32W
Operation Temperature
10 ~ 40
RS-232C / RS-485 (bps)
115200
57600
19200
9600
4800
3600
2400
1200
Dimension (mm)
343(W) x 223(L) x 59(H)
Net Weight
2.0 kgs
Multiplex: Up to 30 field/sec. for NTSC / 25 field/sec. for PAL
Quad-field: Up to 120 field/sec. for NTSC / 100 field/sec. for PAL***
Quad-frame: Up to 240 field/sec. for NTSC / 200 field/sec. for PAL****
Recording Rate
Specifications are subject to change without notice.
*4 audio inputs, can select only 1 during operation for recording at the same time.
** with 2 mono audio outputs from the same source.
***NTSC: 4CH x 30IPS = 120 fields/sec, PAL: 4CH x 25IPS = 100 fields/sec
****NTSC: 4CH x 60IPS = 240 fields/sec,PAL: 4CH x 50IPS= 200 fields/sec

Related product manuals