Swann 4 CH Digital Video Recorder

To Next Page

To Previous Page

Remove the HDD from Cartridge

Step 4 Loose all screws on the Cartridge

Note: 1. If you want to change the different HDD, you must remove the connector from HDD (refer to

Page21 ).

2. When HDD works for a period of time, the surface temperature will be high, please notice it.

APPENDIX #2 – REPLACE THE HDD

Step 1 Open the cap

A (locked)

(unlocked)

Step 2 Unlock the cabinet by turning the key

anti-clockwise

Step 5

HDD HOT SWAP FUNCTION

Please must follow the steps as following to ensure the reliability.

1)Unlock the cabinet by turning the key anti-clockwise.

2)Key in your password and press enter to disable the hard drive.

3)Pull out the HDD cartridge.

4)Replace the HDD in the tray.

Note: After turning the key to unlock position, please waitfor severalseconds till HDD operation

stop completely.

Step 3 Pull out the cartridge

Swann 4 CH Digital Video Recorder - Replace the HDD