8
Connection Diagram
Connect the Video (BNC-connector) and
Power cables from the camera to the
extension cable then connect the Video
cable on the other end of the extension
cable to a Video input on the rear of the
DVR. Do this for the other cameras in
your kit.
Connect the cameras to power
using the power splitter then
connect the power adapter to a
wall outlet.
Connect the power supply to the Power input
on the DVR and then plug it into a wall outlet.
Connect the mouse to the USB port.
If you’ve got a TV or monitor with HDMI in,
connect to the HDMI port on the DVR.
If you’ve got a monitor with VGA but not
HDMI, connect it to the VGA output on the
DVR.
Connect the Ethernet cable from the LAN port
on the DVR to a spare port on your router.
To Next Page
Loading...
