EasyManua.ls Logo

Swann Advanced-Series 8 Channel DVR H.264 - Page 21

Swann Advanced-Series 8 Channel DVR H.264
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
“Network Menu” on page 30: Where you can congure the DVR to operate on
your home network and over the Internet. If you want to connect to your DVR re-
motely using a computer or a mobile device, these settings will need to be cong-
ured correctly.
This is the most complex aspect of setting up the DVR, and requires a working
knowledge of networking methods and protocols.
“Record (Video) Search” on page 33: Where you look for footage of a specic
event. You only need to know the date and time that the incident that you are look-
ing for occurred. You need not know exactly - you can specify a range of times and/
or dates. The DVR will list all recordings made in between the start and end points
you specify.
“Device Management” on page 43: Here you can nd the setup and congurable
options for the devices which can be connected to the DVR. These devices are in
order:
“HDD Management” on page 44: The hard drive, where you store your
footage.
Alarm Conguration Menu” on page 47: The circumstances which will
trigger the DVR to record or issue an alert of some kind (such as an email).
“PTZ Menu” on page 46: For setting up the DVR to work with Pan, Tilt,
Zoom camera systems.
“System Setup Menu” on page 51: All the remaining options and sub-menus.
Here is where you set the Date and Time and your Password, change the video out-
put settings, change languages, or the automatic maintenance schedule of the DVR.

Related product manuals