Swann Advanced-Series 8 Channel DVR H.264 - Detail Files and Log List; The Detail Files Screen; Log List Screen

34
Remember: After making changes to the settings press/click the APPLY button.
The Detail Files Screen
This is the main screen you’ll use when locating specic incidents and recordings. It’s
also where you’ll need to go to perform a backup to a USB ash drive.
For more about using the File List to perform a backup, see “USB Backup” on page
35.
Log List Screen
The event log records all the “events” that the DVR detects, even the ones you’ve
otherwise told it to ignore.
Type: The type of event the DVR has detected.
Content: The conditions which triggered the type of event, such as motion
detected (MD) or a hard drive failure (HDD) and so on.
Time Point: When the event occurred.
Record: Whether the DVR recorded any footage as a result of the event.
Typically, this will depend on whether the DVR is in ALARM
RECORDING mode when the event occurred.
Detail Files and Log List