Swann Advanced-Series 8 Channel DVR H.264 - Display Setup Menu

20
Remember: After making changes to the settings press/click the APPLY button.
The DisplaySetup menu of the DVR. In this picture, the mouse cursor is cur-
rently highlighting the CH1 title eld.
Naming Channels
You can change the name of any channel from the default (and rather drab) “CHx” to
anything that you would like (up to 8 characters in length). A descriptive name on
each channel often makes it easier to remember what camera is where, and which
channel would have captured an event you might be looking for.
Channel Name: The name that will be displayed over the image from a channel.
Simply highlight this box and enter the new name you would like.
Position: Where the title of the channel is displayed on screen. You can choose
any of the four corners of the display (U-L meaning Up-Left, and D-R
meaning Down-Right).
Display Setup Menu