7
Camera Settings: Motion Area
Tap “Camera”, tap the name of your camera, tap the
camera settings button. To change the motion area,
tap “Video Analytics Settings” then “Motion Area”.
This is where you can select a particular area of the
cameras view that you would like to enable for motion
detection.
In this example, the en-
tire view of the camera
is enabled.
1. Tap “Clear All” or tap
on one of the squares to
disable or enable that
area. Please note; any
movement in an area
that is not shaded in red
will not be detected or
recorded.
2. Tap the return button
on your mobile device or
tap “Home” to exit.
To Next Page
Loading...
