English
13
Camera No.: The camera feed you want to alter the settings
for. These will be numbered sequentially, and correspond to
the BNC video inputs labelled on the rear of the DVR. Note
that the channel name here is independent of the Camera Name
selected on the Display: Camera menu screen.
Encoding Parameters (advanced user option): Whether
you’re editing the parameters for the mainstream or the
substream.
Main-Stream: The main-stream is the video feed that the DVR
will record and display. This is the higher-quality stream.
Sub-Stream: The sub-stream is the video steam that the DVR
will send to remote devices via a network or the Internet. It is the
lower-quality stream as a reduction in video size makes it easier
to send over a network.
Record Audio: Choose whether the channel you’ve selected
will record audio or not. If you don’t have any audio devices
connected, it’s a good idea to disable audio, as it will save
some space on your HDD.
Resolution: How many “little dots” are going to make up your
image. There are two options:
D1: About the same resolution as a DVD (704 x 480 for NTSC,
or 704 x 576 for PAL). This is the default resolution for all
channels, and we suggest leaving this setting well alone.
HD1: Literally, half of D1 (352 x 480 NTSC / 352 x 576 PAL) and
about the quality of a typical YouTube video. This won’t save
HDD space - the bitrate is the important setting for determining
how much space your recordings require on the HDD.
CIF: 1/4 of D1 (352 x 240 NTSC / 352 x 288 PAL), and about
the same resolution as a low-quality webcam. We can’t think
of a good reason to use CIF as your resolution setting, unless
you’ve some really cunning plan we didn’t think of. It won’t
save any HDD space - for that, you’ll need to change the bitrate.
Frame Rate: The number of frames per second (fps) that the
DVR will record. The default (and maximum) is referred to as
“real-time” and is 30fps (NTSC) or 25fps (PAL).
Reducing the number of frames per second will either
save hard drive space or improve the data-rate per frame
(depending how you set the bit-rate - see the next point).
Remember that your FPS count is the same as saying “take
X photograph per second” (where X is your FPS setting).
5fps doesn’t sound like much, but it’s still ve individual
photographs per second. If maintaining image clarity while
reducing HDD consumption is your priority, it makes sense to
lower the frame rate.
As with all settings on this screen, some experimentation is
encouraged to nd the settings which will work best for you!
Max. BitRate(Kbps): The actual amount of data that the DVR
will use to record video.
The main-stream uses a variable bitrate to record video - the
more movement occurs in the video, the higher the bitrate
will have to be. When there’s little movement in view, the DVR
will automatically reduce the bitrate to conserve HDD space.
If the amount of movement in a recording would require a
higher bitrate to accurately record than you’ve selected as the
maximum, the DVR will attempt to preserve as much of the
quality as possible by applying compression to the image. This
compression will take the form of irregular, fuzzy blocks over
segments or all of the image. If you encounter this, it indicates
that you might need to increase the overall bitrate.
If you’ve set a high bitrate but a low frame rate, the DVR will
still use all the data it can, resulting in potentially higher
quality per frame than at higher frame rates.
The sub-stream uses a constant bit-rate. This makes the
video easier to stream over a network or the Internet.
Recording: Encode
The Recording: Encode menu allows to
alter and customize how the DVR records
footage and “encodes” the les.
“Encoding” is a term which refers to
the compression algorithm (a fancy,
computer term for “make the le smaller
while retaining visual quality”) used by
the DVR.
You can choose and alter:
t the resolution (per channel),
t the frame rate (how many images
per second the DVR records) and
t the data-rate of each video stream.
The higher the data rate, the “better”
your images will look, but the more
space they’ll require on your HDD.
To Next Page
Loading...
