Need help?Do you have a question about the swaploader SL-214 and is the answer not in the manual?
Warranty coverage, terms, and conditions for SwapLoader products.
Essential safety guidelines for operating and maintaining the SwapLoader hoist.
Outlines the general steps for installing the SwapLoader hoist onto a truck.
Details the process of mounting the SL-214 hoist assembly onto the truck chassis.
Step-by-step instructions for installing the manual control system.
Installation process for the optional air shift control system.
Guides selection criteria for the correct Power Take-Off (PTO) unit.
Procedure for filling hydraulic tank, priming pump, and bleeding air.
Step-by-step guide for loading a container onto the SwapLoader hoist.
Instructions for safely dumping a container with the SwapLoader hoist.
Details the procedure for placing a container on the ground using the hoist.
Procedure to adjust the hook height of the adjustable jib from 36 to 54 inches.
Procedure to adjust the hook height of the adjustable jib from 54 to 36 inches.
Diagram illustrating lubrication points and frequency for hoist components.
Provides ISO grades and interchange options for hydraulic oil.
Details inspection procedures for the mast lock (safety latch) assembly.
Guides inspection and adjustment of the jib lockout valve.
Provides instructions for performing pressure checks on the hydraulic system.
Details pressure check procedures for the Electric over Hydraulic (EHV) system.
Explains how to manually operate hoist cylinders using the EHV override.
General| Brand | swaploader |
|---|---|
| Model | SL-214 |
| Category | Utility Vehicle |
| Language | English |
To Next Page
