EasyManua.ls Logo

SWELLPRO Splash Drone 3 - Specifications

SWELLPRO Splash Drone 3
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
©2018 SwellPro All Rights Reserved
48
Specications
Drone
Waterproof Level
Drone Weight
Axis Diameter
Max Ascend speed
Max descend speed
Max flight speed
Max Flying altitude
Nominal flying
wind speeds
Hovering Precision
Max Flight time (per charge)
Max Take off weight
Positioning System
Flight Controller
Waterproof Brushless Motor
ESC
Surface Buoyant (short periods up to 600mm)
2380g (AUTO version)
450mm
4m/s
3m/s
16m/s
4000meter (above sea level)
a. Typical Maximum = 8m/s (11-16knots)(F4)
b. Typical Gusts = 12m/s (22-27Knots) (F6) Peak
±0.5meter
16minutes
3KG
Dual Satellites - GPS/GLONSS
Swellpro S3
#3510/620KV
40A
Camera
Waterproof Rating
Image Sensor
Lens F.O.V
ISO range
Picture Resolution
Video Resolution
Max video stream
Picture Format
Video Format
Supports memory card
IP67
1/2.3” CMOS, 1400M
106° at F2.0
100 - 1600
14M(4320x3240) 10M(3648x2736) 5M(2592x1944)
APP control1920*1080(30/60p) 1280*720 (30/60p)
Remote Control2880*2160 24p 2560*1440 30p
1920*1080(30/60p) 1280*720(30/60p)
28000Kbps
JPEG
MOV MP4
Class 10 or UHS-1 and above specifications Micro SD card,
maximum support 64GB
Gimbal
Waterproof Rating
Stabilization System
Vertical Controllable Range
Angle step precision
IP67
2 axis – Vertical adjust , Tilt correction
Tilt -90°to 0, Vertical -20° to 20°
±0.02°

Other manuals for SWELLPRO Splash Drone 3

Related product manuals