FITTED EQUIPMENT
105
Push back collar and remove end stop as
shown in the image below.
Push back collar and remove end stop as
shown in the image below.
Align the shower hose connector with the
socket and push into position as shown in the
images below.
To remove shower, push back the collar on the
shower outlet fitting, then pull the shower hose
connection away from the socket.
! WARNING: This socket is for water out
use only. To avoid risk of damage to the
water system, do not use to supply water to
the vehicle.
! WARNING: During periods of cold
weather, ensure vehicle is fully drained
of water to avoid damage to socket and
fittings.
EXTERNAL SHOWER POINT
Back to section menu
To Next Page
Loading...
