FITTED EQUIPMENT
97
Trouble shooting
Problem Problem cause Solution
Burners do not burn or
burn unevenly
Gas bottle is empty
Gas tap is closed
Burner caps are not correctly
positioned
Burners are wet or clogged
Fill bottle
Open tap
Allow caps to cool, then
reposition them
Dry or clean burners
Automatic ignition does
not spark
12V DC battery is discharged
Connections are loose
Ignition points is wet or dirty
Charge battery
Secure connections
Dry or clean ignition point
Control knobs do not function Knobs are mounted
incorrectly
Install knobs correctly
If you cannot solve a problem, contact
the authorised local Services Centre or
Thetford Customer Service in your country.
Servicing
All servicing must be carried out by an
approved competent person. Before any
service work is started, the appliance should
have been left to cool and be disconnected
from both gas and electrical supplies. After
each service the appliance must be checked
for gas soundness and electrical safety.
For service, please contact your authorised
local Service Centre giving details of the model
and serial number on the data badge plus date
of purchase.
Putting in storage
• Close the gas valve at the gas bottle.
• Disconnect the battery.
• Ensure that the control knobs are in the 0
position.
• Wipe the appliance clean and dry.
HOB TROUBLESHOOTING
Back to section menu
To Next Page
Loading...
