EasyManua.ls Logo

Swift Group Basecamp 2018 - Bedding; Doorscreen; Exterior Door; Exterior Door Key

Swift Group Basecamp 2018
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FITTED EQUIPMENT
107
Bedding
Double bed assembly:
1. Grab front on slatted bed and pull into
centre of van. Repeat for other side.
2. Arrange seat cushions as appropriate.
Doorscreen (when fitted)
The door flyscreen is tracked top and bottom
and operation must be by the centre of the
handle to aide a smooth operation.
! WARNING: When opening or releasing
the doorscreen, care must be taken to avoid
trapping fingers.
Exterior Door Key
! WARNING: Care should be taken not to
leave the exterior door key in the door when
unlocking the door. The key may result in
damage in the vehicle side if the door is
released with the key still in the lock.
! WARNING: The door retainer is
designed to hold the door in normal
conditions. In gusty or windy conditions we
recommend the door is closed to prevent it
releasing and slamming shut.
The door flynet operates independently of the
door by sliding across the door threshold.
Exterior door
Operation:
The door is locked from the inside by rotating
the outer handle vertically. To operate the
deadlock facility rotate the inner handle
vertically so it is in-line with the two raised pips
on the dial.
BEDDING / DOORSCREEN
Outer Handle
Back to section menu

Table of Contents

Related product manuals