MAINTENANCE
113
General precautions
For best results in cleaning FENIX NTM, it is
important to remember certain precautions:
- although very durable, the surface of
FENIX NTM must still never be treated with
products containing abrasive substances,
abrasive sponges or unsuitable products,
such as sandpaper or steel wool;
- products with a high acid or very alkaline
content should be avoided because they can
stain the surface;
- when using solvents, the cloth used must be
perfectly clean so as not to leave marks on
the FENIX NTM surface. Any streaks can still
be removed by rinsing with hot water and
drying;
- avoid furniture polishes and wax based
cleaners in general, because they tend to
form a sticky layer on the dense FENIX NTM
surface, to which the dirt adheres.
Maintenance Instructions
Melamine foam Sponge
Maintenance Instructions
Iron
Back to section menu
To Next Page