SERVICES
50
GAS
has individual isolation taps for each appliance
(Fig A), as follows:
Fig. A
WHITE -Space Heater
BLUE -Fridge
GREEN - Oven
RED - Water Heater
Note: the external barbecue point (when
fitted) is fed from the main feed through
a built in integrated isolation valve. See
schematic layout for details.
Flue installations
All flue installations should be inspected
once a year throughout their length for
corrosion. Flues should be replaced if any
sign of perforation is found. Ensure that the
replacement is of an approved type and fitted
by a qualified and competent person.
Thermal insulation heating
Your caravan has been designed and
manufactured to a grade 3 thermal insulation
and heating level for specific climatic
conditions and tested according to the
procedure in EN1645-1.
The classifications are as follows:
Grade 1
A caravan with an average thermal
transmittance (u) that does not exceed
1.7w/(m2k).
Grade 2
A caravan with an average thermal
transmittance (u) that does not exceed
1.7w/(m2k) and which can achieve an average
temperature difference of at least 20ºC
between inside and outside temperatures
when the outside temperature is 0°C.
Grade 3
A caravan with an average thermal
transmittance (u) that does not exceed
1.2w/(m2k) and which can achieve an average
temperature difference of at least 35ºC
between inside and outside temperatures
when the outside temperature is -15°C.
ON
OFF
Back to section menu
To Next Page
Loading...
