Important Safety Precautions
3
ELECTRICAL ISSUES
Do not attempt to control the operation of this fan from any wall controller that is not approved
by Hunter Pacific International Pty Limited for use with this fan. DO NOT use a solid state wall
controller. The use of an unapproved wall controller voids the warranty.
NOTE
The fan and hanger bracket must be earthed.
The fan can be used in conjunction with some home automation systems. For further information please
contact Hunter Pacific International Pty Limited.
To avoid possible electric shock during installation, be sure electricity is turned off at the main power box
before commencing work. Disconnect power by removing fuse or turning off circuit breaker before
installing the fan. Ensure all spliced connections are adequately insulated.
Nothing in this manual is intended to instruct or assist untrained or unqualified persons to install this
product. Additionally, it is the responsibility of the installer and user to apply common sense and care at all
times.
IF THERE ARE ANY PROBLEMS DURING INSTALLATION OF THE FAN, THE INSTALLER MUST CONTACT THE
HUNTER PACIFIC INTERNATIONAL WARRANTY LINE . TEL: 1300 360 280BEFORE LEAVING THE WORK SITE
To Next Page
Loading...