Sycamore Ceiling fan - Care and Cleaning

Care and Cleaning
35
Regular cleaning of your Sycamore Ceiling Fan Blade and Fan Motor Housing is the only maintenance
that is needed. Due to the balanced single blade design, a large build up of dust on the blade may
eventually create an imbalance, causing the blade to wobble during use. This is likely to be more
apparent on fans with a suspended installation. Regular cleaning of the blade is recommended to
prevent dust from building up.
1. When cleaning your fan, only use a soft brush or lint free cloth to avoid scratching the finish. DO
NOT use water when cleaning your ceiling fan. It could damage the motor or the blade and/or
create the possibility of electric shock.
2. When dusting the Fan Blade, you must support the blade to prevent bending - no pressure should
be applied to the blade pivot. After cleaning the Fan Blade, check to ensure that the Drive Shaft is
vertical, otherwise the fan may wobble.
3. Occasionally, it may be necessary to re-tighten the Fan Blade and Fan Motor Housing fixing screws
to prevent any clicking or humming sounds during operation. This is especially true in climates with
broad temperature and humidity ranges, and for fans with high gloss painted blades or motor
housings.
4. If you experience any flaws in the operation of your fan, please check the points in the Trouble
Shooting section (see page 36).
IF THERE ARE ANY PROBLEMS DURING INSTALLATION OF THE FAN, THE INSTALLER MUST CONTACT THE
HUNTER PACIFIC INTERNATIONAL WARRANTY LINE . TEL: 1300 360 280BEFORE LEAVING THE WORK SITE