Ceiling
Supply Wiring
Installation using Ceiling Mounting Box Installation directly mounted to Ceiling Joist
Check that the mounting location is of
adequate strength to support the fan.
Ensure the Supply Wiring is of
sufficient length.
approx.
75mm (3”)
Before commencing installation, turn off electricity supply at the main power box.
Disconnect power by removing fuse or turning off circuit breaker before commencing work.
Checking Ceiling Condition and Preparing for Fan Installation
6
IF THERE ARE ANY PROBLEMS DURING INSTALLATION OF THE FAN, THE INSTALLER MUST CONTACT THE
HUNTER PACIFIC INTERNATIONAL WARRANTY LINE . TEL: 1300 360 280BEFORE LEAVING THE WORK SITE
A
Ceiling Joist
behind ceiling
A
Ceiling
35KG
A
To Next Page
Loading...