Sylvac D70 User Manual

E
Sylvac capacitive probes connected to a D70S
Heidenhain probes connected to a D70H
Can be used to measure thickness, flatness, diameter, length, boring, recesses or positioning.
Restoring factory settings
This setting allows you to revert the D70 to default settings.
Note: This function will reset all of the parameters and settings of your D70. All tolerances,
benchmark values, and sensor settings will be lost.
To do this, proceed as follows:
1. Turn off the D70
2. Switch on the D70
3. When the start screen appears, tap the Syl-
vac logo
4. A panel with 4 icons will appear
5. Tap the «return to factory settings» button
6. Confirm with YES or cancel with NO
7. Tap the «Home» icon to return to the meas-
urement screen
Applications
Sylvac inductive probes connected to a D70i
23

Sylvac D70 Specifications

General

Brand	Sylvac
Model	D70
Category	Monitor
Language	English