Sylvania LC320SS2 - Channel List; Add Channels; Antenna Confirmation

18
Channel List
The channels selected here can be skipped when selecting the
channels using CH +/-.
Those channels can sell be selected with the Number buttons.
Antenna Confirmation
7hs funct on lets you check the digital sgnal strength of each
channek
1 Use &IT to select [Channel List],then press OK. 1
2 Use A / Y to select the channel you want to remove, then 2
press OK.
Use A/V' to select [Antenna], then press OK.
Use the Number buttons or CH +/- to select the channel
for whch you want to check the dgtal sgnal strength.
• The channel d splay for the removed channel darkens.
You vv+Hnot be able to select the channel again using
CH+/-.
• [b reactivate a removed channel, use A/T and press
OK[he reg stered channels are high[ £hted.
• When you remove a main channel, its subchannels are
removed as well.
• The channe with the [DTV] nd cared on the d splay is,_)SC.
Otherwse the channe s N1SC,
Add Channels
This funct on lets you add the off the air along NTSC or analog
Cable channels that were not added by the autoprogram due
to reception conditions at the intal setting.
1
2
Use &IV' to select [Add Channels],then press OK.
Use the Number buttons to enter the number of the
channel you want to add, then press OK.
N(;+e
• If the channe is set to analog channel or external it,put, you
cannot confirm the antenna condt OnL
1 Use &/Y to select the item you want to adius¢,then press
OK.
_2 Ad]us¢ the following terns.