Sym JOYRIDE 125 Service Manual

16. Steering / Front Wheel / Front Cushion
16-10
Front Cushion
Removal of front shock absorber
Loosen two bolts from the front brake calliper.
Remove the front brake calliper and hose.
Loosen the bolts and remove the front shock
absorber.
Installation
Install the front fork and front shock absorber.
Tighten the bolts.
Align the top of the cushion with the steering and
tighten the bolt.( Note not to interference the
cushion oil installing bolt.)
Bolt×4
Calliper Bolt×2
To this chapter contents

Sym JOYRIDE 125 Specifications

General

Displacement	124.6 cc
Fuel System	Electronic Fuel Injection
Transmission	CVT
Front Suspension	Telescopic fork
Rear Suspension	Unit Swing
Front Brake	Disc
Rear Brake	Drum
Length	1900 mm
Engine Type	4-stroke
Cooling System	Air-cooled