-8-
Ready to fly your quadcopter
1.Press the ON/OFF
power switch up.
2. Open battery cover,
and connect battery
connector with dash
receiver.
3. Enclose battery into
the fuselage, after
closing battery cover,
turn on the switch on
the bottom of aircraft.
4.Push the throttle lever to the highest position,
and then pull it back to the lowest position.
There will be one clear sound from the transmitter,
this shows that the quadcopter has entered into
the pre-fly state.
Function introduction
When four indicator lights on the bottom
of aircraft start to flicker, it means electric
quantity of the aircraft is insufficient. Please
control the aircraft to make a return voyage.
1.Low-voltage protection:
In the condition of rotating aircraft’s fan blade,
when being crashed or stuck, aircraft’s circuit
will conduct over-current protection.
2.Over-current protection:
To Next Page
Loading...
