Altiris Deployment Solution™ from Symantec User’s Guide 106
TCP/IP advanced options - IP interfaces
IP Interfaces (Linux and Windows type only). Click Add to set named interfaces for this
network adapter. You can add TCP/IP addresses to an existing network adapter card on
Linux or Windows operating systems.
TCP/IP advanced options - gateway
View Gateway addresses. Click Modify to edit an existing IP address. Use the up and
down arrows to move an address to the top of the list, which acts as the primary
address. Review all selection by clicking the TCP/IP option on the Configuration page.
TCP/IP advanced options - DNS
Click Add to set a new DNS address.
DNS server addresses, in order of use: Add additional Domain Naming Servers
(DNS) for this network adapter.
Append these DNS Suffixes (in order): Add the name of the Domain Suffix and use
the up and down arrows to set the DNS suffix search order.
TCP/IP advanced options - WINS
Click Add to set a new WINS address.
Add additional WINS settings for this network adapter. Select one of the Enable
NetBIOS over TCP/IP, Disable NetBIOS over TCP/IP, or Use NetBIOS settings
from DHCP server options for this network adapter. See also Computer configuration
properties on page 101.
Field Description
IP Address Add or modify an IP address common to all interfaces.
Subnet mask Enter the appropriate subnet mask.
Field Description
Interface
Name
Establish Linux-specific IP interface settings. Ensure you use the
“eth” syntax when naming new interfaces. Example: eth0:1 or
eth0:new interface.
Broadcast
Address
Enter the Broadcast address for the specified IP interface.
Interface
State
The default value of the interface state is Up, which denotes that
the named interface is operating. You can shut down the named
interface by selecting Down.
See also Computer configuration properties on page 101.
Field Description
Gateway Add additional gateways for this network adapter.
To Next Page
Loading...