Symbol DS6708 - Microqr; QR Inverse

13 - 68 Symbol DS6708 Digital Scanner Product Reference Guide
MicroQR
Parameter # F1h 3Dh
To enable or disable MicroQR, scan the appropriate bar code below.
QR Inverse
Parameter # F1h 4Bh
This parameter sets the QR inverse decoder setting. Options are:
• Regular Only - the scanner decodes regular QR bar codes only.
• Inverse Only - the scanner decodes inverse QR bar codes only.
• Inverse Autodetect - the scanner decodes both regular and inverse QR bar codes.
*Enable MicroQR
(01h)
Disable MicroQR
(00h)
*Regular
(00h)
Inverse Only
(01h)
Inverse Autodetect
(02h)