Symbol DS6708 - User Preferences; Set Default Parameter; Parameter Scanning

4 - 4 Symbol DS6708 Digital Scanner Product Reference Guide
User Preferences
Set Default Parameter
Scan this bar code to return all parameters to the default values listed in Table A-1 on page A-1.
Parameter Scanning
Parameter # ECh
To disable decoding of parameter bar codes, scan the Disable Parameter Scanning bar code below. Note that the
scanner can still decode the Set Defaults parameter bar code. To enable decoding of parameter bar codes, either
scan Enable Parameter Scanning or Set All Defaults.
*Set All Defaults
*Enable Parameter Scanning
(01h)
Disable Parameter Scanning
(00h)