18
2D Desktop Barcode Scanner
(908000.)
(9080021.)
(9080020.)
(3110280.)
(3110281.)
(908004.)
(908003.)
Code 11
Code 128
Enable/Disable
Decode Length Setting
Check Bits
Enable Disable
Enable/Disable
Enable
Disable
Min Decode Length Max Decode Length
One Check Bit
Two Check Bits
(909000.)
(9090011.)
(9090010.)
Default All Code 11 Settings
Scanning following setting code to modify the min or max decode length of
Code 11.Refer to page 19“Decode Length Settings”.
Default setting min decode length is 4,max is 80.
Min decode length is 1,max is 80.
Default All Code 128 Settings
To Next Page
Loading...
