Symcode BROCHURE - UPC-E1

22
2D Desktop Barcode Scanner
(9140051.)
(9140050.)
(9140061.)
(9140060.)
(9140071.)
(9140070.)
(9140081.)
(9140080.)
UPC-E1
(9140091.)
(9140090.)
Check Bits
Scanning following setting to select whether transmit last check bit.
Enable
Disable
Digital System
Enable
Disable
Supplementals
Scanning following setting code to select enable or disable 2 or 5 supplementals.
Default setting is 2 or 5 supplementals disabled.
2 Supplementals ON
2 Supplementals OFF
5 Supplementals ON
5 Supplementals OFF
Most of UPC code is started with 0,getting it enabled before scanning those code.
If need to read UPC code which is started with 1,getting UPC-E1 enabled.
Default setting is disable.
Enable/Disable
Enable Disable
UPC digital system will be transfered in front of barcode data.