DOC06501_Revision F
ATS-6501 Users Guide
38
OK
File will be stored as: Test####dat, where the # is a sequence of 4 numbers and
characters to uniquely identify the file name.
Note: When the file are stored using the “user” option, the filename will not end
with a .gz extension even if the compression is turned on.
b. When using the timestamp file naming scheme the files are written out at the
log_interval setting and time stamped starting with the last two digits of the year,
two digit month, two digit day, two digit hour, and two digit minute when the log
was opened. Example (File 0810021530) log was opened 2 Oct 2008 at 15:30
(UTC). This command will also accept an optional suffix to append to the
filename (i.e. .nov = 0810021530.nov).
ATS-6501>log_filename timestamp <suffix>
OK
Warning
: If the ATS-6501 is currently logging data and you change the file
naming convention you may wipe out any saved files stored in memory. Ensure
these files are downloaded prior to making any changes to prevent a possible
loss of data.
F. If file compression is desired use the log_compression command and turn the
compression on (1) or off (0). Default is on (1)
ATS-6501>log_compression 0 (Compression=Off)
OK
Note: When using compression in conjunction with the timestamp filename option the file will
end with the .gz file extension. User defined filenames will not append the .gz extension. Users
will need to keep this in mind when they attempt to open these files.
G. You can verify the data logging settings using the settings gps_logging:ftp command.
ATS-6501>settings gps_logging:ftp
[compression] false
[enable] false
[file_count] 4
[filename]
[digits] 4
[prefix] test
[suffix] dat
[type] user
[interval] 15
[log_selection]
[bestposa] ontime 7200
[ionutca] ontime 7200
[rangea] ontime 60
[rawalma] onchanged
[rawephema] onchanged
[rxhwlevelsa] ontime 60
To Next Page
Loading...
Need help?
General
