Copyright © 1996 Telecom Solutions, a division of SymmetriCom, Inc. All rights reserved. Printed in U.S.A.
DIGITAL CLOCK DISTRIBUTOR
500 SERIES
TL1 USER’S GUIDE
(USED WITH MIS CARD 090-45018-14)
Page 1
TMSL 097-45018-02
Issue 3: Mar 96
TELECOM
SOLUTIONS
a division of SymmetriCom, Inc.
CONTENTS PAGE
1. GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. USING THIS PRACTICE. . . . . . . . . . . . . . . . 2
3. DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . . 2
A. Conventions . . . . . . . . . . . . . . . . . . . . . 2
B. Application Message Types. . . . . . . . 2
C. Command Definitions . . . . . . . . . . . . . 3
D. Response Definitions . . . . . . . . . . . . . . 3
E. Parameter Definitions and Values . . . 4
F. Task/Command Cross-reference . . . 4
G. Alarm Message Format . . . . . . . . . . . 8
4. COMMANDS . . . . . . . . . . . . . . . . . . . . . . 12
Security Commands
ACTIVATE USER (ACT-USER). . . . . . . . 14
CANCEL USER (CANC-USER) . . . . . . . 16
EDIT SECURITY PASSWORD
(ED-SECU-PID). . . . . . . . . . . . . . . . . 18
Card Configuration Commands
EDIT EQUIPMENT (ED-EQPT) . . . . . . . . 20
EDIT PARAMETER T1 (ED-PRMTR-T1) . 22
INITIALIZE REGISTER T1 (INIT-REG-T1) 24
INITIALIZE SYSTEM (INIT-SYS) . . . . . . . 27
OPERATE ALARM CUTOFF
(OPR-ACO-ALL) . . . . . . . . . . . . . . . 29
REMOVE T1 (RMV-T1) . . . . . . . . . . . . 31
RESTORE T1 (RST-T1) . . . . . . . . . . . . . . 33
SET ATTRIBUTE LOG (SET-ATTR-LOG) . 35
SET ATTRIBUTE T1 (SET-ATTR-T1) . . . . . 37
SET DATE (SET-DAT) . . . . . . . . . . . . . . 40
SET SOURCE IDENTIFIER (SET-SID) . . . 42
SET THRESHOLD T1 (SET-TH-T1) . . . . . 44
SWITCH DUPLEX EQUIPMENT
(SW-DX-EQPT) . . . . . . . . . . . . . . . . 46
COMMANDS (Contd) PAGE
Retrieve Alarms (Manual and Automatic) Commands
RETRIEVE ALARMS (RTRV-ALM-
{ALL|EQPT|T1}) . . . . . . . . . . . . . . . . 47
REPORT ALARM (REPT-ALM {EQPT|T1}) 55
REPORT EVENT (REPT-EVT) . . . . . . . . . . 59
RETRIEVE LOG (RTRV-LOG) . . . . . . . . . 62
Card Information and Date Commands
RETRIEVE ATTRIBUTE T1 (RTRV-ATTR-T1) 64
RETRIEVE CONDITIONS (RTRV-COND-
{EQPT|T1}) . . . . . . . . . . . . . . . . . . . . 67
RETRIEVE HEADER (RTRV-HDR) . . . . . . 73
RETRIEVE EQPT (RTRV-EQPT) . . . . . . . . 75
RETRIEVE PARAMETER T1 (RTRV-
PRMTR-T1) . . . . . . . . . . . . . . . . . . . . 78
RETRIEVE PERFORMANCE
MONITORING T1 (RTRV-PM-T1) . . . . 81
RETRIEVE THRESHOLD T1 (RTRV-TH-T1) 86
Figures
1. Command Format . . . . . . . . . . . . . . . . . . . 3
2. MIS Card Switch . . . . . . . . . . . . . . . . . . . . . 13
Tables
A. Parameter Definitions . . . . . . . . . . . . . . . . 4
B. Task/Command Cross-reference . . . . . . 7
C. Terminal Alarm Displays . . . . . . . . . . . . . . 9
D. Operational Considerations . . . . . . . . . . . 12
1. GENERAL
1.01
This practice provides information on the in-
put messages (commands), response messages, and
automatic messages used with the Telecom Solu-
tions DCD 500 series shelf and the NAS System. The