Symmetricom TimeProvider 500 series User Manual

Issue 3: Mar 96 TMSL 097-45018-02
Page 75
RETRIEVE EQUIPMENT
(RTRV-EQPT)
MESSAGE CATEGORY: SYSTEM MAINTENANCE
TYPE: INPUT/RESPONSE
This command retrieves communications port(s) configuration information.
COMMAND
RTRV-EQPT:[<tid>]:<aid>:<ctag>::;
aid: COM-1 = COM port 1
COM-2 = COM port 2
COM-3 = COM port 3
COM-ALL = shows all COM ports
Example:
RTRV-EQPT::COM-1:115;
This example, tagged as command 115, requests configuration information for communications
port 1.
COMPLETED RESPONSE
The response format depends on whether any alarm conditions exist to report for the input condi-
tions. If there are no alarm conditions, the form is:
<sid> <date> <time>
M <ctag> COMPLD
[ "<COM-1>:[<baud>],[<monmode>],[<keepalive>],[<comtype>],
[<endoftext>],[<localecho>],[<compri>];"cr lf]
[ "<COM-2>:[<baud>],[<monmode>],[<keepalive>],[<comtype>],
[<endoftext>],[<localecho>],[<compri>];"cr lf]
[ "<COM-3>:[<baud>],[<monmode>],[<keepalive>],[<comtype>],
[<endoftext>],[<localecho>],[<compri>];"cr lf]
;
baud: 1200 = 1200 bps
9600 = 9600 bps
<null> = No change
monmode: ALW = allows a port to view data traffic associated with other user ports
in real-time
INH = inhibits a port from viewing data traffic associated with other
user ports in real-time (factory set for all ports)
<null> = no change

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English