Issue 3: Mar 96 TMSL 097-45018-02
Page 35
SET ATTRIBUTE LOG
(SET-ATTR-LOG)
MESSAGE CATEGORY: ADMINISTRATION
TYPE: INPUT/RESPONSE
This command clears the 64-event system message log (which is in the MIS). It is useful after retrieving
the messages with the RTRV-LOG command. (The INIT-SYS command performs a Òcold restartÓ and
clears all the system registers, and the INIT-REG-T1 command clears specific registers.)
COMMAND
SET-ATTR-LOG:[<tid>]::<ctag>::ALARMS,CLR;
Example:
SET-ATTR-LOG:::117::ALARMS,CLR;
This example, tagged as command 117, erases all information stored in the system message log.
COMPLETED RESPONSE
<sid> <date> <time>
M <ctag> COMPLD
;
Example:
TELECOMSOLUTIONS 95-12-08 16:31:46
M 117 COMPLD
;
ERROR RESPONSE
<sid> <date> <time>
M <ctag> DENY
<errcde>
;