14
Chapter 2: Hardware Setup
Add a Network Interface Card
Your DiskStation has a PCI Express expansion slot which allows you to install 10GbE or Gigabit network interface
card for LAN port expansion.
1
To install a network interface card:
1
Press and hold the power button until you hear a beep sound to shut down your DiskStation. Disconnect all
cables from your DiskStation to prevent any possible damage.
2
Open the top cover of DiskStation by removing the 6 screws that secure the main unit.
1
For more information about supported 10GbE or Gigabit network interface cards, please visit
www.synology.com
.
To Next Page
Loading...
