Synopsys, Inc. 5
PCIe IP Prototyping Kit Installation Guide
SolvNetPlus
DesignWare
5.60a
March 2020
1
Setting Up Hardware Components
The PCIe IP Prototyping Kit provide hardware and software elements required to assemble a PCIe Root
Complex, and PCIe Endpoint prototyping platforms. Designers can rapidly develop, test, and debug IP
software before SoC availability. The kit is a complete and stand-alone solution that requires minimal
configuration.
This document provides the necessary information to set up the PCIe IP Prototyping Kit.
This document is divided in the following sections:
■
“Contents of PCIe IP Prototyping Kit” on page 7
■
“Hardware Setup” on page 16
Before setting up the hardware components, make sure you read the DesignWare PCIe IP
Prototyping Kit Release Notes.
To Next Page
Loading...
