SYNRAD OEM v30 Operator’s Manual Version 2
27
Laser Safety
When integrating SYNRAD
®
laser OEM lasers, the Buyer and/or integrator of the end system is
responsible for meeting all applicable Standards to obtain the CE mark. To aid this compliance
process, SYNRAD testing program has demonstrated that laser lasers comply with the relevant
requirements of Directive 2014/30/EU, the Electromagnetic Compatibility Directive, as sum-
marized in the table below.
Table 2-2 European Union Directives.
Applicable Standards / Norms
2004(2014)/108(30)/EU Electromagnetic Compatibility Directive
2014/35/EU Low Voltage Directive
2011/65/EU RoHS Directive
EN 61010-1:2010 Safety Requirements for Electrical Equipment for Measure-
ment, Control, and Laboratory Use - Part 1: General
Requirements
EN 61000-6-4:2007 Radiated Emissions Group 1, Class A
EN 61000-6-4:2007 Conducted Emissions Group 1, Class A
EN 61000-6-2:2005 Electrostatic Discharge Immunity
EN 61000-6-2:2005 RF Electromagnetic Field Immunity
EN 61000-6-2:2005 Electrical Fast Transient/Burst Immunity
EN 61000-6-2:2005 Conducted RF Disturbances Immunity
After a laser or laser processing system has met the requirements of all applicable EU Direc-
tives, the product can bear the ocial compliance mark of the European Union as a Declara-
tion of Conformity.
To Next Page
Loading...
Need help?
General
