Syntec 60CB - Page 122

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
How to Operate 60 Series Controller– 122
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Same situation as "User Name"
Set Kernel Server
Path
F5 Maintain → F2 Set Kernel Server → F5 Set Kernel Server
Explanation
Set the related function of kernel server.
Parameters
Start server while boot
Start the server after booting or not
Timeout(ms)
Set the acceptable timeout for connection failure
Start Server
Path
F5 Maintain → F2 Set Kernel Server → F5 Set Kernel Server →F1 Start Server
Explanation
Start the kernel server immediately.