机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 15
•
•
•
•
•
•
•
•
•
•
•
•
•
•
When a unexpected event happen that cause a break to the processing file and you don't wanna do the
whole process again
users can press this button and the system will go back to the block before the break happen, and
continue the working.
Hint: Please DO NOT press the button at normal condition, this might cause the panel process state
to be wrong.
4.4.6 Operator Panel-F6: Clear List
Clear workinglist. No Item will show on workinglist after use this function.
4.4.7 Operator Panel-F7: LogIn
Enter username and password to login to the system
login different users can have different permissions
Permissions can be set in "Authority mangement"
4.4.8 Operator Panel-F8: LogOut
logout the accessed acount
4.4.9 Workinglist Manipulation
Normal Mode
Select Files/Folder, Output Workinglist
Operator Frame(F1) → F3 File Manage
F7: Change to USB/Sys.
Select File/Folder which contains the NC files for all order.
Press F1:Output List
To Next Page
Loading...
Need help?
General
