Syntec 60CB - Page 86

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 86
•
•
•
•
•
•
•
i.
ii.
1.
2.
3.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Option Setting
Path
5 key: F5 Maintain → Next → Next → Next → F5 About →F4 System Permissions →F2 Option
Setting
8 key: F5 Maintain → Next → F8 About → F7 System Permissions → F2 Option Setting
10+8 key: G8 System → F10 About →F4 System Permissions → F2 Option Setting
Explanation
Can be used to set the system function options
The function will be enabled after entering the password, there are two ways to access the
password
Please ask the original manufacturer for the setup password
Press "Online Decrypt" and scan the bar code with phones or tablets to access the
password online (supported after 10.118.22N)
"Online Decrypt" Button location:
5 key: F5
8 key: F8
10+8 key: F10
Option Information Restore
Path
5 key: F5 Maintain → Next → Next → Next → F5 About →F7 System Permissions → F3 Op. Info
Restore
8 key: F5 Maintain → Next → F8 About → F7 System Permissions → F3 Op. Info Restore
10+8 key: G8 System → F10 About → F4 System Permissions → F3 Op. Info Restore
Explanation
Can be used to restore the system authorities
Please ask the original manufacturer for the setup password
The 2Dbarcode of Operation Manual
Path
5 key: F5 Maintain → Next → Next → Next → F5 About → F9 Help
8 key: F5 Maintain → Next → F8 About → F9 Help
10+8 key: G8 System → F10 About → F12 Help
Explanation
Display the 2Dbarcode of the operation manual
From 10.118.28Z, 10.118.29Z, 10.118.40F, 10.118.44 (included)