Installation |
17
1
Hexagonal head set screw
2
Sylodyn anti
vibration block
Available as Systemair accessory with a hole Ø
16mm
3
Safety plate Available as Systemair accessory with a hole Ø
16mm
4
Hexagonal nut
5
Mounting foot
6
Mounting frame
Lifting and positioning
The weight of the fan units varies depending on the motor size and accessories. As a result, the fan unit can also be
very bulky and heavy. You can find precise information on the name plate or the data sheet.
Caution
Risk of parts falling down
♦ When fitting the fan, pay attention to its weight and the weight of the components.
Lifting
♦ Lift the fan unit slowly and carefully.
♦ Use hoisting gear permitted for the weight of the fan.
♦ Attach the hoisting equipment to flanges and foot
bores or at the marked places.
♦ Use transport equipment (e.g. lifting eyes) if available.
♦ Please observe the marking “oben/top” on the fan.
Positioning
♦ Observe the arrows on the name plate or the housing
of the fan. They show the direction of rotation and air
flow.
♦ Position the fan unit so that it is standing in the
planned direction of flow.
♦ Provide enough free space for inspection and
maintenance work on the fan unit.
Anchor
♦ Use suitable fittings.
♦ If you are not sure, contact Systemair.
| 014
To Next Page
Loading...
