Cleaning |
29
11.5 Spare parts
♦ Use original spare parts from Systemair only.
♦ When ordering spare parts, please specify the serial number of the fan. This can be found on the name plate.
12 Cleaning
Safety information
♦ Cleaning may only be carried out by adequately qualified persons, details see Table 1 Qualifications, page 2.
♦ Observe the 5 rules of electrical safety, see 2.3 5 rules of electrical safety, page 2!
♦ The fans of the AJR and AJ8 series may only be wiped down with a damp cloth. Cleaning with large amounts of water
(e.g. high-pressure cleaner) may cause damage.
Preconditions
♦ The power supply has been switched off (all-pole circuit breaker).
♦ The impeller must be at a standstill.
13 Deinstallation/dismantling
Deinstall and dismantle the fan in reverse order of installation (7 Installation, page 15) and electrical connection (8 Elec-
trical connection, page 21).
14 Disposal
♦ Ensure material is recycled. Observe national regulations.
♦ The device and the transport packaging are predominantly made from recyclable raw materials.
♦ Disassemble the fan into its components.
♦ Separate the parts according to:
• reusable material
• material groups to be disposed of (metal, plastics, electrical parts, etc.)
| 014
To Next Page
Loading...
Need help?
General