Commissioning Report
|
31
Measured data at commissioning
Voltage [V]: Temp. of transported air [°C]:
Current L1 [A]*:
Fan impeller speed [rpm]:
Current L2 [A]: “Air volume”, “Differential pressure” not necessary for Jet fans
Current L3 [A]: Air volume [m3/s]:
*For single-phase fans, fill in line “Current L1 [A]”
Differential pressure [Pa]*:
*Δ- Pressure between suction-side and discharge of the fan
If an air flow measurement is not possible, this value can be calculated using the following formula:
X
=
Duct cross-section [m²]
Flow speed [m/s]
Grille measurement acc. to VDI 2044
Air volume [m³/s]:
Yes No
Commissioning of the fan successful?
□ □
Date, installer's signature
Date, operator's signature
| 014
To Next Page
Loading...
