13 Konformitätserklärung
13.1 Niederdruck-Axialventilatoren AW-EX
EG-Konformitätserklärung
EC Declaration of Conformity
Der Hersteller: Systemair GmbH
The Manufacturer Seehöfer Str. 45
D-97944 Windischbuch
Tel.: +49-79 30 / 92 72-0
erklärt hiermit, dass folgende Produkte /
certied herewith that the following products:
• Axialventilator für Explosionsgefährdeten Bereiche die Ex-Schutzart erhöhte Sicherheit “e”, Zone 1 und 2, Kategorie 2G,
Explosionsgruppe IIB der Baureihe AW-EX (e);
•
Axial fans for explosion-hazardous areas, type of protection increased safety “e”, zone 1 and 2, category 2G of explosion group IIB of
range AW-EX (e);
Ab Baujahr / Since year of manufacture: 2014
allen einschlägigen Bestimmungen der Maschinen Richtlinie 2006/42/EG und Richtlinie 94/9/EG entspricht.
ensure all relavant regulations of machinery directive RL 2006/42/EG and directive 94/9/EG.
Die Maschine entspricht weiterhin allen Bestimmungen der Richtlinien Elektrische Betriebsmittel (2006/95/EG),
Elektromagnetische Verträglichkeit (EMV) (2004/108/EG) und RoHS-Richtlinie 2011/65/EU.
The products ensure furthermore all regulations of directives electrical equipment (2006/95/EG), electromagnetic compatibility (EMC)
(2004/108/EG) and RoHS-Directive 2011/65/EU.
Name, Adresse und Nummer des Prünstituts:
Name, address and identication no. of the technical institute (for prototype testing):
ZELM Ex e. K. Prüf- und Zertizierungsstelle
Siekgraben 56
D-38124 Braunschweig
Nummer des Prünstituts: 0820 /
Registration-no.: 0820
Zertikat Nr. der EG Baumusterprüfbescheinigung / Inspection certicate no. of EC-type-examination certicate
(ZELM 05 ATEX 0279X)
Folgende harmonisierten Normen sind angewendet: /
The following standards are used:
DIN EN 14986:2007 Konstruktion von Ventilatoren für den Einsatz in explosionsgefährdeten Bereichen /
Design of fans working in potentially explosive atmospheres
DIN EN 13463-1:2009 Nicht-elektrische Geräte für den Einsatz in explosionsgefährdeten Bereichen - Teil 1:
Grundlagen und Anforderungen
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and
requirements
DIN EN 13463-5:2011 Nichtelektrische Geräte für den Einsatz in explosionsgefährdeten Bereichen Teil 5: Schutz
durch Konstruktive Sicherheit „c“
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by
constructional safety „c“
DIN EN 1127-1:2011 Explosionsfähige Atmosphären - Explosionsschutz - Teil 1: Grundlagen und Methodik
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
DIN EN 60079-0:2009 Explosionsfähige Atmosphäre - Teil 0: Geräte - Allgemeine Anforderungen
Explosive atmospheres - Part 0: Equipment – General requirements
DIN EN 60079-7:2007 Explosionsfähige Atmosphäre - Teil 7: Geräteschutz durch erhöhte Sicherheit „e“ /
Explosive atmospheres - Part 7: Equipment protection by increased safety „e“
DIN EN 60204-1:2006 Sicherheit von Maschinen - Elektrische Ausrüstung von Maschinen - Teil 1: Allgemeine
Anforderungen
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Boxberg,
30.12.2013
Datum/date ppa. Harald Rudelgass, Technischer Leiter / ppa. Harald Rudelgass, Technical director
33
Konformitätserklärung
Ex-Ventilatoren - 10.2014