16.2 Transport
WARNING
Hazard of impact if the Multibox falls down
» Transport the device carefully and with suitable hoisting gear.
» Wear a helmet and goggles.
WARNING
Electrical hazard from damaged connection wire or connections
» Do not use the connection wire, terminal box or rotor for transporting..
" Transport and unload the pallet with the necessary care.
" Transport the Multibox either in the original packaging or on the transport devices provided for this pur-
pose (e.g. lifting screws) with suitable hoisting equipment.
" Only lift the Multibox by the base frame when unpacking it.
" In manual transport, remember human lifting and carrier powers which can be expected (weight can be
seen on the name plate).
" Avoid impacts and blows and distortion of the base frame and other parts of the housing.
16.3 Storage
CARE
Hazard due to loss of function of the motor bearings
» Avoid storing for too long (recommendation: max. 1 year)
» Turn the rotor manually every three months, wear gloves.
» Before installation, check proper function of the motor bearings.
" Store the Multibox in the original packaging dustproof, dry and protected against weather.
" Avoid extreme effects of heat or cold.
32
Delivery, transport, storage
Multibox MUB - V 1.0
To Next Page
Loading...
Need help?
General