Setting the SAVE CONNECT module to Modbus TCP converter mode |
7
• Modbus Gateway TCP-RTU/RS485 mode switches the SAVE CONNECT module to
Modbus TCP converter mode.
D. Indicates the modbus device ID.
E. Choose between automatically generated IP or static IP.
F. Allow the SAVE CONNECT module to connect to the router directly by providing your lo-
cal Wi-Fi network name and password. This can be used if the router does not support
WPS function. The device supports WPA-PSK and WPA2–PSK only.
G.You can disable web interface by ticking Confirm selection.
H.Software and hardware version of the SAVE CONNECT module.
Detailed Modbus parameter list can be found at product description on systemair.com
website (Item Number: 323606).
Use device ID "1" to read/write Main Board Modbus registers and device ID "2" to read
the IAM Modbus registers.
254977 | v6
To Next Page
Loading...
