8
| Declaration of Conformity
7 Declaration of Conformity
Manufacturer
Systemair UAB
Linų st. 101
LT–20174 Ukmergė, LITHUANIA
Office: +370 340 60165 Fax: +370 340 60166
www.systemair.com
hereby confirms that the following product:
Radio equipment: SAVE CONNECT
(The declaration applies only to product in the condition it was delivered in and installed in the facility in accordance
with the included installation instructions. The insurance does not cover components that are added or actions carried
out subsequently on the product).
Comply with all applicable requirements in the following directives:
• Radio Equipment Directive 2014/53/EU
• ROHS Directive 2011/65/EU
The following harmonized standards are applied in applicable parts:
EN 60950-1:2006 /
A11:2009 / A1:2010 /
A12:2011 / A2:2013
basic requirements for the safety of information technology equipment – Part 1. Article 3.1
(a)
EN 62311:2008
assessment of electronic and electrical equipment related to human exposure restrictions
for electromagnetic fields (0Hz – 300GHz). Article 3.1(a)
EN 301 489-1 v2.1.1;
EN 301 489-1 v2.2.0
Electromagnetic Compatibility (EMC) standard for radio equipment and services. Part 1:
Common technical requirements. Article 3.1(b)
EN 301 489-3 v2.1.0
Electromagnetic Compatibility (EMC) standard for radio equipment and services. Part 3:
Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz
and 246 GHz. Article 3.1(b).
EN 301 489-17 v3.1.1;
EN 301 489-17 v3.2.0
Electromagnetic Compatibility (EMC) standard for radio equipment and services. Part 17:
Specific conditions for broadband Data Transmission Systems. Article 3.1(b)
EN 300 328 v2.1.1
Data transmission equipment operating in the 2.4 GHz ISM band and using wide band
modulation techniques. Article 3.2
Symbol explanation
Use only power supplies which are provided by manufacturer and in original packing of this product.
RECYCLING: this product bears the selective sorting symbol for Waste electrical and electronic equipment
(WEEE). This means that this product must be handled pursuant to European directive 2012/19/ EU in
order to be recycled or dismantled to minimize its impact on the environment.
Ukmergė, 17-06-2021
Nerijus Lapackas
Technical Manager
254977 | v6
To Next Page
Loading...
