Note: The Keypad Dial Option will use the Audio
configurations for the currently selected patch.
Patch Dial
The first depression of the DIAL button followed
immediately by a second depression will take the
unit into the Patch Dial menu, allowing the user to
access 1 of 26 pre-stored configuration memories:
MENU : Patch Dial 1
PATCH 1
The and buttons can be used to select the
required patch (1 of 26). A third depression of the
DIAL button instructs the unit to dial the ISDN
numbers associated with the selected patch. The
call status is then displayed as above.
If any of the ISDN calls fail to be established, the
user can request the unit to redial the failed calls by
pressing the DIAL button twice, or by pressing the
DIAL button followed by the ISDN telephone
number.
HANG Button
The first depression of the HANG button is used to
hang-up the ISDN calls.
MENU :Hangup ISDN
ALL(Yes) or Bch(number)
If Yes is pressed then all ISDN calls are
disconnected. Alternatively you can enter a number
1..n to disconnect a specific ISDN Bchannel.
Numerical 0 - 9 Buttons
The 0 - 9 Numerical Keypad allows entry of ISDN
numbers, sub-address information and for use in
patch names.
Page 5
To Next Page
Loading...
