TW20_NS20_EW20 Series Weighing Indicator Operation Manual REV:01
Recall direct pre-tare
1 Press T key（selected from to ）to recall pre-tare value .
2 Display shows pre-tare value .
3 Place the item on the pan and wait to get weight stable,display show net weight.
4 Remove item from the pan ,the net window show negative value.
5 Press key to clear tare value.
5.5 Weighing Operation
Switch on the scale,display show normal weighing mode.
Load the weight on the pan,display shows weight .
To Next Page
Loading...