T Scale EW20 Series - Page 61

TW20_NS20_EW20 Series Weighing Indicator Operation Manual REV:01
- 56 -
3 Press key to confirm.
The display will be show “Enter calibration
weight by using numeric keys ”.
4 Press key to confirm.
5 Place the test weight on the platter.
Better to use minimum 1/3 of the scale
capacity)
6 Press key to confirm.
The display will be show “Please empty the
scale”.
7 Remove the test weight from the scale.
8 Press key to confirm
The display will be show “Calibration
success ”
( Calibration Completed and back to the
normal weighing mode)