The weighing scale is a precision electronic instrument, handle it carefully.
The device must only be operated by personnel trained in the operation of
this equipment.
The operating personnel must read and understand the safety instructions
in these operating instructions.
To prevent any accident, only qualified service personnel is authorized to
open this device!
Verify the local voltage and receptacle type are correct for the scale.
Only use original adaptor, other could cause damage to the scale.
Pluggable equipment must be installed near an easily accessible socket
outlet.
To prevent load cell ,Avoid load the weight exceed the maximum capacity
on the platform
To prevent the keys, Do not scratch the keypad with a sharp object
Avoid unstable power sources. Do not use near large users of electricity
such as welding equipment or large motors.
Avoid sudden temperature changes, vibration, wind and water.
Avoid heavy RF noise.
Do not install the scale in direct sunlight.
To Next Page
Loading...
Need help?
General
