T Scale M503 Series User Manual

M503 Series Wheelchair Scales Technical Manual
- 12 -
7. PARAMETERS
Enter the Menu
 Turn on the scale. Press key display will show
Choose the Menu
 Press , it can choose menu block or options one by one.
Enter the Selected Menu
 Press , it can confirm which will be shown displayed.
Enter in to TECH
Note: Before enter the tech menu, press calibration switch, which is
locating below the scale
 When display showed Pi n , press and keys to enter
the function
Escape from the Menu
 Press key, it can escape from the menu to weighing mode.
Parameter Block
Menu
Sub
Menu
Description
F1 off
Off
0/ 3/ 5/ 15/ 30
To set the auto close the scale time.
F2 com
Select first RS 232 or USB
P prt
By pressing Print key , weighing value will be
added to the memory and print the print out
P cont
Send data continuous
P auto
Automatic accumulation.
Individual weighing values are automatically
F1 off

T Scale M503 Series Specifications

General

Brand	T Scale
Model	M503 Series
Category	Scales
Language	English